2022 Beneteau America Oceanis 38.1

In the tradition of the latest 41.1, the Oceanis 38.1 cleverly combines practical features, performance, and elegance on a boat size where function generally outweighs personalization. The Oceanis range continues to stand by its desire to offer a wide range of options. The Oceanis 38.1’s chined hull offers particularly surprising cruising comfort. Good and taut to aft and low on the water, the rigidity under sail of this cruiser takes her further and faster, with exceptional stability. It is a joy to have two helm stations, a mainsail arch and a huge swim platform on a sailing yacht this size. Underway, she is nimble and fast, easy to sail shorthanded but with a large enough cockpit to accomodate bigger crews.

For the Italian design team, the challenge was to multiply the living spaces in the salon and offer greater privacy in the owner cabin, while maintaining the visual perspective offered in previous versions. The L-shaped galley optimizes seating space in the salon, allowing up to eight people to sit around the table.

Basic Boat Info

Make: Beneteau America
Model: Oceanis 38.1
Year: 2022
Category: Sail
Designer: Fino-Conq
Construction: Fiberglass

Dimensions

Length: 37'9 ft
Length Overall: 37'9 ft
Length Of Deck: 36'6 ft
Waterline Length: 35'2 ft
Beam: 13'1 ft
Max Draft: 6'10 ft
Min Draft: 5'5 ft
Bridge Clearance: 55'5 ft
Dry Weight: 15,102 lb

Engines / Speed

Engines: 1
  • Engine Power: 30hp
  • Type: Inboard

Tanks

Fuel Tanks: 1
Fuel Tank Capacity: 34 gal

Other

Drive Type: Sail
Boat Class: Cruisers
More Info : Beneteau USA Website
Construction
  • Design made following European Directive requirements and according to CE certification

  • Monolithic hull in polyester

  • Monolithic structural hull liner bonded to the hull

  • Injected deck construction in fiberglass and Saerform foam sandwich, covered with non-slip diamond pattern

  • Hull-deck joint screwed, bonded and trimmed with 1 toerail

  • Cast iron keel fixed with bolts and stainless steel backing plates

  • 2 Underhung rudders with stainless steel stock

  • White hull - Grey metal hull decoration

Deck Equipment

RIGGING

  • Standard mast 9/10 anodized aluminum deck stepped, 2 aft-swept spreaders

  • Anodized aluminum boom

  • Discontinuous stainless steel standing rigging

  • 1 Backstay: Bridle

  • Rigid boom vang

  • Genoa furling system with drum on the deck

  • 2 Genoa tracks with piston adjusted traveller cars

  • 2 Genoa sheet returns stainless steel fairleads

  • Rigging run back to cockpit (except boom topping lift)

  • Complete running rigging: Main halyard, Genoa halyard with clutch
    on mast and cleat, Boom topping lift with cleat on mast, Mainsheet,
    2 Genoa sheets, 2 Automatic reefing system lines

  • 4 Clutches, 4 Jamming cleats

  • Mainsail sheet in cockpit bottom (1 Fixed point)

  • 2 Flag halyards

  • optional extra:
    - Fixed composite arch, with incorporated LED lighting (+ 2 Stand-up blocks for mainsail sheet)

WINCHES

  • 2 Self-tailing genoa sheet winches (H40.2 STA)
  • 1 Self tailing winch (H35.2 STA)
  • 1 Aluminum "Speed Grip" winch handle, 1 Winch handle holder

SAILS

  • Semi Dacron main sail with class code, full batten with sliders (Roller slides for fully battened mainsail)

  • Dacron Genoa on furler and UV protection strip

  • Lazy Jack


MOORING - ANCHORING GEAR

  • Self-draining chain locker - Clench bolt - Hatch cover
  • Single bow roller
  • 4 Aluminum mooring cleats - Stainless steel chafing plate

SAFETY ON DECK

  • 1 Open stainless steel pulpit, 2 Stainless steel aft pushpits
  • 1 Ring lifebuoy bracket
  • Double life lines and stainless steel stanchions
  • Welded ring on pushpit for flag

COCKPIT

  • Self-bailing cockpit

  • 1 Cockpit locker

  • 2 Lockers in cockpit bottom - Side helm seats

  • 1 Liferaft locker - aft cockipt (0,95 m x 0,59 m x 0,36 m /3’1’’ x 1’11’’ x 1’2’’)

  • Teak slats on cockpit benches (1,69 m x 0,50 m / 5’7’’ x 1’8’’)

  • Table with compac top, Stainless steel handrail

  • 2 Steering wheel consoles: Stainless steel steering wheels - 800mm diameter / 2’7’’ - Leather covered - Steering gear at the helm station - Metal cable transmission system - Stainless steel handrail - Navigation instrument pod (optional instruments) - Cup holders

  • 2 Steering compass

  • 2 Deck access points to tiller system

  • 1 Emergency tiller

  • Portside engine control and control panel

  • 2 Hinged PMMA companionway doors - Sliding hatch made of PMMA

  • 1 Swim ladder

SWIM PLATFORM / AFT TRANSOM (Comfort Trim package)

  • Fully opening transom, convertible into swim platform (2,60 m x 0,70 m / 8’6’’ x 2’4’’)
  • Gas locker strut opening (manual), 1 Stainless steel integrated telescopic swimming ladder
  • Teak decking

Contact Us


More From Beneteau America


2022 Beneteau America Oceanis 51.1
2022 Beneteau America Oceanis 40.1
2022 Beneteau America Oceanis 46.1
2022 Beneteau America Oceanis 34.1